# How to assign routers to HAAS Alert groups in NetCloud Manager

06/12/2026 7:11 am CDT

The last configuration step for the HAAS Alert / Ericsson integration is to add the routers to the groups that will receive the SDK application. Thus far, you should have added the SDK application to NetCloud Manager, created the groups for HAAS Alert, added the JSON configuration, and configured the GPIOs. In this article, you'll add routers to the HAAS Alert group(s).

**Warning**: Only continue if you created specific groups for HAAS Alert. Otherwise, no further action is required.

## Assign Routers

1. In the left menu, click **Devices**  
2. Tick the box next to all the routers being assigned to the same Group  
3. Click **Move** in the top menu  
4. In the pop-up window, select the appropriate Group  
5. Click **OK**

At this point, the HAAS Alert SDK application is in the process of being downloaded to the routers in the Group.

7. Repeat the previous steps for all **NEW** groups with routers being activated with HAAS Alert

|     |
| --- |
|  |

No further action is required in NetCloud Manager.